Traxxas T-Maxx, T-Maxx 2.5/3.3 and E-Maxx 

Rear Steering Fix:

1.  If your front steering servo look like this, the truck probably has all wheels turning in the same direction:

If it does look like the above and the rear steer isn't reversed, then swap it to the position below. 
In the above picture, the front of the truck is to the right.

2. Reversed Position of the steering servo and servo saver:

Flip the servo and servo saver front to back as shown in the picture below. The output shaft on the servo will now be towards the rear of the truck while the servo saver ear is pointing towards the front of the truck. You may also need to reverse the servo channel on your radio for it to turn the correct way. 

3. Fixed so that the wheels turn opposite when the Y-harness reverser is installed. This is what is should do now.

We believe there may have been some trucks that have been assembled differently with the servo in the first position or the customer has re-assembled the truck that way. By swapping to the second position you should now have a functioning rear steer setup.

Thanks to all the guys that help and reported the issues they had with our products.

Rad R/C Racing Products